![]() |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
We recommend fuse protection through the use of properly selected I2t fusing (semiconductor fuses). Devices such as circuit breakers and general purpose fuses, while sufficient and necessary for load and installation protection, do not provide adequate protection for the semiconductor device. |
|
Part Numbers The part number shows the physical size of the fuse (14 mm or 22 mm diameter) and the amperage of the fuse. The FUSE-HLDR fuse holders are finger safe, din rail units. Ferrule style fuses: (to be installed in the finger safe fuse block listed below.) Manufactured by Cooper Bussmann. FUSE-EXT-14-25 Bussmann
FWP-25A14Fa, I²T Fuse, 14 mm x 51 mm, 25 amp
Din Rail, Finger-Safe, Fuse Blocks for Ferrule Style Fuses: FUSE-HLDR-14-01 Bussmann
CH141D Fuse holder, 14 mm, 1 position
|
![]() Finger-Safe Fuse Blocks and ferrule
style fuse |
L Bracket Style Fuses (installs inside the DDA-6V50, DDA-6V75, DDA-100 or DAA-6V50, DAA-6V75, DAA-6V100) FUSE-SEMIBR-35A Bussmann
35FE I²T Fuse, L bracket style, 35 amp
|
![]() L Bracket Fuse |
Large I²T Fuses and Terminal Blocks: (for bolt-down applications) 100 Amp I2T FUSE Bussmann
FWP-100B |
![]() Large 125-200 Amp
Fuses ![]() Large Fuse Holders |
For a printable copy of the data bulletin including the complete specifications: I²T fuses, fuse blocks and I2T fuse accessories |