Solid state relays and solid state relay heat sinks1-90 amp solid
state relays
|
On a HEATSK-DIN-2.0 |
On a HEATSK-DIN-1.0U |
Two on a Ultra Power Cooler with fan |
Triple on a Ultra Power Cooler with fan |
Triple on a UPC with fan |
Part Numbers: | Pre-installed* on: | ||
Good Heat Sink |
Better Heat Sink |
||
DC Control Input: | SSR
only |
Heatsk- Din-2.0 |
Heatsk- Din-1.0U |
HDA-3V25E up to 25A, 24-277 VAC max, 3-32 VDC activated | |||
HDA-3V50E up to 50A, 24-277 VAC max, 3-32 VDC activated | |||
HDA-3V90E up to 90A, 24-277 VAC max, 4-32 VDC activated | |||
HDA-6V50E up to 50A, 24-600 VAC max, 4-32 VDC activated | |||
HDA-6V90E up to 90A, 24-600 VAC max, 4-32 VDC activated | |||
AC Control Input: | |||
HAA-3V25E up to 25A, 24-277 VAC max, 90-264 VAC activated | |||
HAA-3V50E up to 50A, 24-277 VAC max, 90-264 VAC activated | |||
HAA-3V90E up to 90A, 24-277 VAC max, 90-264 VAC activated | |||
HAA-6V50E up to 50A, 24-600 VAC max, 90-264 VAC activated | |||
HAA-6V90E up to 90A, 24-600 VAC max, 90-264 VAC activated | |||
* Pre-installed = Solid state relay + thermal transfer pad or thermal grease + 2 mounting screws + torqued to 20-25 inch pounds + the heat sink shown. For the fastest on site installations, using the pre-assembled packages is beneficial. Power-io can design other assemblies, contact us with your specifications. The Ultra Power Cooler is a small footprint, thermally engineered, fan assisted heat sink. Please provide 120 vac, 9 watts, power for the fan. | |||
Purchase heat sinks, thermal
pads, pre-installation options separately:
Parts page
|
|